5 Maintenance
Preserving operational readiness
Maximum permissible damage to the driver's
seat
Category of the truck
Maximum permissible
damaged area
IIA
IIB
100 cm
2
IIB + H
2
IIB + C
2
H
2
IIB + H
2
+C
2
H
2
20 cm
2
– Please contact your authorised service
centre for replacement or advice if you have
any questions.
Checking the antistatic paint layer
DANGER
Risk of explosion due to static charge!
Depending on the version, non-
conductive parts (plastic parts) on
the truck must be painted using a
special antistatic paint. This paint
prevents the parts from building up
an electrostatic charge. Otherwise,
static discharge may occur, resulting
in explosions in the surrounding
atmosphere in potentially explosive
areas.
– Have any damage repaired by your
authorised service centre.
– Check the paint layer on the plastic parts for
damage and abrasion.
The antistatic paint is applied to the following
plastic parts:
• Panelling
• Consoles
• Steering column panelling
• Document holders
• Compartments
380
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
