Operation 4
Lifting
Operation with reversible fo
rk arms
(variant)
DANGER
Risk of explosion!
Working on a truck within potentially
explosiveareas can lead to explosions
in the surrounding atmosphere.
No work must be performed on the
truck in potentially explosive areas!
– Do not perform any work on trucks
in potentially explosive areas.
– Change fork arms only outside of
potentially explosive areas.
DANGER
Risk of explosion!
Only reversible fork arms that comply
with explosion-protection regulations
maybeusedinpotentiallyexplosive
areas.
These fork arms are specially coated
to prevent sparks forming when
coming into contact with the load or
floor.
– Fit only fork arms that correspond
to explosion protection regulations.
– Check that the cladding is com-
plete.
– Do not use fork arms with worn
cladding.
DANGER
Risk of fatal injury from falling load!
Normal fork arms are not structurally designed
for reverse operation. Failure to observe this
instructioncan lead to materialfailure and ultimately
to the load falling.
– Only work in reverse operation using reversible
fork arms (1).
WARNING
Risk of accident from slipping load!
Loads may slip on the reversible fork arms if there is
no load support. A fork extension (variant) cannot
be secured against slipping.
– Do not use a fork extension (variant).
563
68011531 EN - 06/2019 - 02 185
To Next Page
Loading...
