4 Operation
Attachments
a subtraction with the previously measured
and added load.
Delete total load
– To delete the total load, press the soft-
key.
The
Clear total load? messa
ge
is
displayed.
– To delete, press the
Softkey.
– To cancel, press the
Softkey.
Attachments
Fitting attachments
DANGER
Risk of explosion!
Workingonatruckwit
hin potentially
explosiveareas can
lead to explosions
in the surrounding
atmosphere.
No work must be perf
ormedonthe
truck in potentia
lly explosive areas!
– Only assemble at
tachments
outside potentia
lly explosive areas.
DANGER
Risk of explosion!
Working within potentially explosive
areas with attachments that do not
comply with explosion-protection
regulations can lead to explosions
in the surrounding atmosphere!
– Only operate attachments that
comply with the explosion-protec-
tion regulations.
– Check the area of application by
comparing with the information on
the nameplate of the attachments.
– If the area of application is not clear,
ask the safety officer.
If the truck is equipped with an integrated
attachment (variant) at the factory, the specifi-
cations in the STILL operating instructions for
integrated attachments must be observed.
220
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
