Operation 4
Decommissioning
Decommissioning and storing the
truck
CAUTION
Damage to components due to incorrect storage!
Improper storage or decommissioning for a period
of more than two months can result in corrosion
damage to the truck. If the truck is parked in an am-
bient temperature of below -10°C for an extended
period, the batteries will cool down. The electrolyte
may freeze and damage the batteries.
– Store the truck in a dry, clean, frost-free and
well-ventilated environment.
– Implement the following measures before
decommissioning.
Measures to be implemented before
decommissioning
– Clean the truck thoroughly; see the chapter
entitled "Cleaning the truck".
– Lift the fork carriage to the stop several
times.
– Tilt the lift mast forwards and backwards
several times and, if fitted, move the attach-
ment repeatedly.
– To relieve the strain on the load chains,
lower the fork onto a suitable supporting
surface, e.g. a pallet.
– Check the hydraulic oil level.
– Apply a thin layer of oil or grease to all
uncoated moving parts.
– Lubricate the truck according to the "lubri-
cation plan".
– Lubricate the joints and actuators.
563
68011531 EN - 06/2019 - 02 351
To Next Page
Loading...
