4 Operation
Dynamic Load Control
Dynamic Load Control
Description
"Dynamic Load Control" is an assistance
function for handling the load in an improved
and more secure manner. This function
protects the load from abrupt movements.
"Dynamic Load Control" regulates the lift
dynamics, the tilt dynamics and the driving
movements depending on the load weight and
the lift height. Vertical lift mast positioning and
load measurement functions become simple.
Load movements which could lead to critical
conditions are slowed down if necessary,
giving the driver more time to react to a
potentially hazardous situation.
Dynamic Load Control can comprise the
following variants:
• Reduction of the dynamic
s according to the
load weight
• Fork wear protection "Silent Lift"
• Automatic mast vertical positioning
• Lift mast tilt angle dis
play
• Overload detection
• Speed reduction when the fork carriage is
raised
• Load measurement
• Tare function
• Precision load measurement
• Total load
– See the following sections in this chapter.
208
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
