Maintenance 5
Preserving operational readiness
Maintaining the seat belt
DANGER
There is a risk to life if the seat belt fails during an
accident!
If the seat belt is faulty, it may tear or open during
an accident and no longer keep the driver in the
driver's seat. The driver may therefore be hurled
against the truck components or out of the truck.
– Ensure operational reliability by continually
testing.
– Donotuseatruckwithadefectiveseatbelt.
– Only have a defective belt replaced by your
service centre.
– Only use genuine spare parts.
– Do not make any changes to the belt.
NOTE
Carry out the fo
llowing checks on a regular
basis (monthly
). In the case of significant
strain, a daily
check is necessary.
Checking the
seat belt
6327_342-009
1
2
3
– Pull out the belt (3) completely and check
for wear.
The belt must
not be frayed or cut. The
stitching mu
st not be loose.
– Check whether the belt is dirty.
– Check whether parts are worn or damaged,
including the attachment points.
– Check the buck
le(1)toensurethatitlocks
in properly.
When the belt tongue (2) is inserted, the belt
must be held securely.
563
68011531 EN - 06/2019 - 02 377
To Next Page
Loading...
