Operation 4
Attachments
If attachments are fitted at the place of use,
the specifications in the operating instructions
from the attachment manufacturer must be
observed.
If an attachment is not delivered together with
the truck, the specifications and operating
instructions of the attachment manufacturer
must be observed.
Before initial commissioni
ng, the function
of the attachment and the vis
ibility from the
driver's position with and w
ithout a load must
be checked by a competent per
son. If the
visibility is deemed insuffi
cient, visual aids
such as mirrors, cameras, mo
nitor systems
etc. must be used.
– Observe the following warnings.
DANGER
Risk of fatal injury from falling load!
If attachments that hold by clamping or by exerting
pressure do not feature a second operating func-
tion (lock) that can be actuated, the load may be
released and dropped unintentionally.
– Make sure that the second operating function
(lock) is available and can be actuated.
– When retrofitting such attachments, ensure
that a second operating function (lock) is also
retrofitted.
DANGER
Risk of fatal injury from falling load!
When installing a clamp with integral sideshift
function, ensure that the clamp does not open when
the sideshift is actuated.
– Notify your authorised service centre before
installation.
– Never grab or climb on moving parts of the truck.
563
68011531 EN - 06/2019 - 02 221
To Next Page
Loading...
