Still RX20-20L - Page 230

4 Operation
Dynamic Load Control
0,0°
0,70
m
1,5 t
6219_003-223
The Lower fork slightly prompt is
displayed.
– Lower the fork carriage.
NOTE
Slowly lowering the fork carriage increases
the measurement accuracy in trucks with
multi-lever operation.
The value is calculated. The Calc. ongo-
ing
message appears.
0,0°
0,70
m
1,5 t
1,32 t
6219_003-224
1
If the calculation
was successful, the load (1)
minus the tare valu
e is displayed.
NOTE
If the tare function was not active, the load is
shown including the fork carriage and load
pick up.
216
56368011531 EN - 06/2019 - 02