Still RX20-20L - Page 228

4 Operation
Dynamic Load Control
0,0°
0,70
m
1,5 t
--,-- t
6219_003-225
1
– Press the "Tare" softkey (1).
The activation bar next to the "Tare" sym-
bol
lights up.
0,0°
0,70
m
1,5 t
6219_003-223
The Lower fork slightly prompt is
displayed.
– Lower the fork carriage.
The value is calculated. The message
Zero-
ing ongoing
is displayed.
If the taring operation was successful, the
value
0.00 t is displayed. The activation bar
next to the "Tare" symbol
remains lit.
– If the taring operation was unsuccessful,
follow the prompts on the display and repeat
the process.
When a load is picked up,
--.-- t is dis-
played.
The "precision load measurement" can be
performed.
214
56368011531 EN - 06/2019 - 02