4 Operation
Handling loads
– Position the forks.
– Set the lift mast to vertical.
– Lift the fork carriage to the stacking height.
CAUTION
Risk of component damage!
When the fork is inserted into the rack, take care not
to damage the rack or the load.
– Insert the fork as f
ar under the load as
possible. Stop the
truckassoonasthe
fork back is restin
g on the load. The load
centre of gravity m
ust be midway between
the fork arms.
196
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
