4 Operation
Attachments
6219_003-056
1
Plug connectors on the lift mast
Non-clamping attachments are connected
to the third hydraulic circuit via the plug
connectors (1) on the fork carriage and are
controlled via the "5th hydraulic function".
If the truck is equipped with multi-lever oper-
ation, the attachments can also be controlled
via the "6th hydraulic function".
– Before attaching or detach
ing attachments,
release the pressure from t
he plug connec-
tors (1) and the other hydra
ulic circuits.
Attachments must only be installed by compe-
tent persons. The specifications provided by
the manufacturer and supplier of the attach-
ments must be observed during installation of
the attachments.
– Before each use of the attachment, check
and ensure the functions of the installed
attachment.
Starting the wizard
– Apply the parking brak
e.
– Switch on the truck.
– Press the button
.
– Press the "Settings"
Softkey
.
– Activate the "Access authorisation for the
fleet manager".
–PresstheService softkey .
224
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
