Operation 4
Cab
Selecting blower settings
– To select a lower fan output, turn the fan
control knob (2) anticlockwise.
– To select a high blower output,
turn the fan
control knob (2) clockwise.
Setting heating levels
– To set a lower heater power, turn the
heating level control knob (1) anticlockwise.
– To set a higher heater power, turn the
heating level control knob (1) clockwise.
Setting the air vent control knob
– To direct the air flow to t
he footwell, turn the
air vent control knob (3
) in an anticlockwise
directiontothe
positi
on.
– To direct the air flow to the windscreen, turn
the air vent control knob (3) in a clockwise
directiontothe
position.
The
centre position directs the air flow to
the footwell and the windscreen.
Switching off the heating system and
blower
– Turn the heating le
vel control knob (1) in an
anticlockwise di
rection until it reaches the
stop.
The heating system is shut off.
– Turn the fan control knob (2) in an anticlock-
wise direction until it reaches the stop.
The blower is shut off
.
563
68011531 EN - 06/2019 - 02 269
To Next Page
Loading...
