4 Operation
Procedure in emergencies
WARNING
Risk of injury from automatic emergency shutdown!
If the truck controller automatically shuts down the
drive units, no drive functions are available.
– Stopthetruckwiththeservicebrake.
NOTE
It is essential that the safety officer gives
approval to the following operation!
In an emergency (e.g. if the truck stops on train
tracks), the truck can be immediately moved
out of a danger area despite the automatic
emergency shutdown having been triggered.
– To do this, push and hold the reset button (1)
and simultaneously actuate the accelerator
pedal.
Thetruckwillmoveinthepreselecteddrive
direction.
– Drive the truck out of the danger area.
– Inform the safety officer.
– Notify the authorised service centre.
NOTE
Only push the res
et button without consulting
the safety office
r in the event of acute danger.
Drive the truck
out of the danger area (non-
potentially ex
plosive area)!
298
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
