4 Operation
Procedure in emergencies
WARNING
Risk of accident due to unguided truck!
If the towed truck is not steered, the truck may veer
out in an uncontrolled manner.
The truck being towed must also be steered by a
driver.
The driver of the truck being towed must sit in the
driver's seat and fasten the seat belt before towing.
– Use the available restraint systems.
Procedure
– Set down the load and l
ower the fork arms
close to the ground.
– Set the drive direction switch to the neutral
position.
– Apply the parking brake.
– Switch off the truc
k.
6219_901-009
– Disconnect the battery male connector.
– Check the pulling force and braking force of
the towing vehicle.
– With the help of
aguide,movethetowing
vehicle to the t
ruck.
– Secure the tow bar to the tow coupling on
the towing vehicle and the truck.
– Sit on the driver's seat in the truck to be
towed. Fasten the seat belt.
– Use the available
restraint systems.
– Release the parking brake.
– Select a towing speed that allows the
truck and towing vehicle to be braked and
controlled at all times.
– Tow the truck out of t
he potentially explosive
area.
– After towing, secure the truck so that it
cannot roll away, e.g. by applying the
parking brake or by using wheel chocks.
– Remove the tow bar.
304
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
