4 Operation
Replacing and transporting the bat
tery
CAUTION
Risk of damage!
– Position the battery cables on the
batteryin such a way that the cables
cannot be crushed either when
removing or inserting the battery or
when closing the battery door.
Once the battery is correctly positioned in the
battery compartment:
– Carefully lower the battery.
– Carefully move the lifting accessories out
from under the battery.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is connected while the
truck is switched on (under load), a transition spark
will be produced. This transition spark can damage
the contacts and considerably shorten the service
life of the contacts.
– Do not connect the battery male connectors
when the truck is switched on.
– Make sure that the truck is switched off before
connecting the battery male connector.
– Close the bat
tery lock (1).
NOTE
The battery door will close only when the
battery is locked.
332
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
