4 Operation
Transporting the truck
DANGER
Risk of accident from the truck crashing!
Steering movements can cause the rear of the truck
to veer off the loading bridge towards the edge.
This may cause the truck to crash.
– Before driving across a loading bridge, ensure
that the loading bridge is properly attached and
secured.
– Ensure that the transport vehicle onto which the
truck is to be driven has been sufficiently secured
to prevent it from shifting.
– Maintain a safe distance from edges, loading
bridges, ramps, working platforms etc.
– Drive slowly and carefully onto the transport
vehicle.
6210_001-012_V3
Wedging the wheels
– Park the truck sec
urely.
– Secure the truck from rolling away by
placing a wedge in front of each front wheel
and behind each rear wheel.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the truck is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
– Switch off the truck before the battery male
connector is disconnected.
– Do not disconnect the battery male connector
while the truck is switched on, except in an
emergency.
– Ensure that the truck is switched off.
– Disconnect the battery male connector.
Lashing down
DANGER
Th
e load may slip if the lashing straps/tension belts
sli
p!
The
truck must be lashed securely so that it cannot
mov
e during transportation.
–Ma
ke sure that the lashing straps/tension belts
a
re tightened securely and that the pads cannot
s
lip off.
348
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
