Maintenance 5
General maintenance information
– The maintenance check lists indicate the
maintenance work that is due.
The intervals are defined for standard use.
Shorter maintenance intervals can be defined
in consultation with the operating company,
depending on the application conditions of the
truck.
The following factors may necessitate shorter
maintenance intervals:
• Dirty, poor-quality roadwa
ys
• Dusty or salty air
• High levels of air humidity
• Extremely high or low ambien
t tempera-
tures and extreme changes
in temperature
• Multi-shift operation with a high duty cycle
• Specific national regulations for the truck or
individual components
Service menu
The date when the truck r
equires maintenance
is stored in the Service
menu.
NOTE
Access to the settings menu is only available if
the truck is at a standstill and the parking brake
is applied. If the parking brake is released
prematurely, the settings menu will close.
Access is only granted when the password is
entered by the fleet manager.
–Stopthetruck.
– Actuate the parking brake.
– Press the button
.
– Press the "Settings" softkey
.
The first menu level appears.
– Activate the "Access authorisation for the
fleet manager".
The display changes to the "Settings menu".
– Press the
Service softkey .
The "Service menu" opens on the display.
– Press the
Maintenance interval
softkey.
563
68011531 EN - 06/2019 - 02 363
To Next Page
Loading...
