Safety 2
Basic principles for safe operatio
n
We warn against installing and using restraint
systems that have not been approved by the
manufacturer.
DANGER
Risk of explosion from additional
bores in the battery hood!
Explosive gases can escape and can
lead to potentially fatal injuries if they
explode. Sealing bores with plugs
is not sufficient to prevent gas from
escaping.
– Do not drill any holes in the battery
hood.
DANGER
Risk of accident from additional holes in the battery
hood!
The rigidity of the battery hood is impaired and
the battery hood can break. The driver's seat may
collapse into the battery hood, which could cause
the driver to perform uncontrolled steering and
driving manoeuvres.
– Do not drill any holes in the battery hood.
NOTE
Welding operations are forbidden.
The operating company is only permitted to
make modifications to the truck independently
if the manufacturer goes into liquidation and
the company is not taken over by another legal
person.
The operating company must also fulfil the
following prerequisites:
• Design documents, test documents and
assembly instructions associated with the
modification must be permanently archived
and remain accessible at all times.
• Check that the following points are adhered
to with regard to modifications. Change if
necessary.
○ Capacity rating plate
○ Decal information
563
68011531 EN - 06/2019 - 02 43
To Next Page
Loading...
