Safety 2
Emissions
Vibrations
The vibrations of the machine have been
determined on an identical machine in ac-
cordance with the standards DIN EN 13059
"Safety of industrial trucks - Test methods
for measuring vibration" and DIN EN 12096
"Mechanical vibration - Declaration and verifi-
cation of vibration emission values".
Frequency-weighted effective value of accel-
eration on the seat
MSG 65 driver's seat
Uncertainty of
measurement
<0.6m/s
2
K = 0.18
Tests have indicated that the amplitude of the
hand and arm vibrations on the steering wheel
or on the operating devices in the truck is less
than 2.5 m/s
2
. There are therefore no mea-
surement guidelines for these measurements.
The individual vibratio
n load on the driver
over the course of a worki
ng day must be
determined by the opera
ting company in
accordance with Direct
ive 2002/44/EC at
the actual place of use i
n order to consider all
additional influences,
such as driving route,
intensity of use etc.
NOTE
Please observe the definition of the following
responsible person: "operating company".
563
68011531 EN - 06/2019 - 02 67
To Next Page
Loading...
