User’s Manual
184 Software Configuration
Make active color proportional to dimmer level - Use this option to make the active channel colors intensity
proportional to the current output level. When the channel is at full the background will be the defined active channel
color. At 50% the background will be a half shade of the defined color.
Intelligent (ML) view grouped by fixture type - with this on, all MLs will be grouped together by type. With this
off, MLs will appear in numerical fixture patch order.
Intelligent (ML) view will show simple color fixtures - with this on, simple color mixing fixtures will appear in the
ML view.
Channel Display - Channel Select Color - Defines the background color of selected channels. Click on the colored
box to select a different color.
Channel Display - Channel Active Color - Defines the background color of active channels. Click on the colored
box to select a different color.
Channel Display - Grid Background Color - Defines the background color of the entire channel grid. Click on the
colored box to select a different color.
Channel Display - Channel Intensity Bar Color - Defines the color of bar representing the dimmer output value.
Click on the colored box to select a different color.
Channel Display - Magic Sheet background color - Defines the background color of Magic Sheet view. Click on
the colored box to select a different color.
Channel Display, Font - Click on the font button to set the text style used in the channel display. A sample of the
font will be displayed just below this button.
Fixed column count - If this value is set to zero then the channel view will adjust the number of columns depending
on the width of the window. Setting a fixed column count will automatically adjust the width of each of the cells but
maintain the same number of columns per row.
General Grid Settings - background color - Defines the background color of all grids other than the channel
display. Click on the colored box to select a different color.
General Grid Settings - Selected row background color - Defines the background color of all selected rows in
grids other than the channel display. Click on the colored box to select a different color.
General Grid Settings - Font - Click on the font button to set the text style used in all grids other than the channel
display. A sample of the font will be displayed just below this button.
Cue List Editor - Scene breaks background color - Defines the background color of all scene break rows in the cue
list editor. Click on the colored box to select a different color.
Use Dark Styling - Turning this option on (requires a restart) put LightFactory in a dark mode. All of the windows
and controls will adopt a color scheme that is dark (black, dark grey etc).
Reopen windows on startup and loading settings - When saving setting and closing down the software the position
of all windows will be saved. With this option turned on the windows will return to the position they were when the
software starts up or the setting are restored.
Keep command window on top of all other windows - By default whatever window is active will draw itself on top
of all other windows including the Command Line interface. Turn this option on to make sure that the command
window is always drawn on top of all other windows regardless of its focus status.
Create a taskbar button for every window
Use metro style scroll bars - with this option on, the scroll bars will be a sleeker version. With this off, the scroll bars
are bigger.
Reset to default colors - will restore colors to factory defaults.
To Next Page
