User’s Manual
86 Software Configuration
any time. This is a useful feature for both on-the-fly control or when pre-programming shows away from the final
venue.
To assign an apply shortcut to a channel group, enter a valid shortcut number into this field. Once entered the shortcut
will automatically be assigned and become active.
To learn how to use a shortcut once it has been set up, see "Shortcut Options" on page 161.
Snap Attributes
When "Snap Attributes" is checked, intelligent fixtures attributes will immediately snap to their maximum value as
soon as the group value is raised above 0%.
If this option is not selected the value of the properties will operate the same as the dimmer and will rise and fall as a
proportion of the group value.
12. Options
Add Selected Groups to a Cue
To create a new cue or add groups to an existing cue:
1) Select the groups you want to add to the cue by clicking on the row to highlight it. Use the shift or control
key to select multiple groups.
2) Click on the options button and from the resulting drop down menu select "Add selected groups to cue".
3) The "cue selection" dialog will pop up to select the cue into which you want to add the group. Set the "cue
list" and "cue" number that you want to add the channels to.
4) If you want to add a short description to the cue being created, enter this into the field provided.
5) Select "OK" to complete this operation.
NEO NOTES & TIPS: The "cue selection" dialog will default to the last selected cue list and the next available
(integer) cue number.
To cancel the operation and return to the channel window click on the "Cancel" button.
Add Active Groups to a Cue
This operation will work exactly as the above option with active groups (groups with a value above zero) added to the
cue rather than selected.
Snapshot When Adding Groups
Toggle the "Snapshot when adding groups" option to record the current channel state into all newly added groups.
Select Active Button
This button serves several functions. By clicking on the left hand side of the button will select all of the active
channel groups. Once selected you can use the mouse wheel to raise or lower all of the values.
Clicking on the drop down right side of the button will pop up a menu with further options.
Select All / Unselect All
To select all of the groups click on the "Select All" menu option.
To unselect all of the currently selected groups click on the "Unselect All" menu item.
Select Inactive
Click on "Select Inactive" to select all of the groups where the value is currently 0%.
Sorting
You can sort the channel groups grid by any of the columns by simply clicking on the column header. Clicking a
second time will reverse the sort order of the selected column.
To Next Page
