Additional Server Features 5-77
6 Operating and Maintaining the Printer
Starting the Printer 6-3
Loading Model and Support Cartridges 6-5
Producing Models 6-7
Printing Modes 6-8
Preparing the Printer 6-9
Starting Printing 6-10
Printer Interface Color Key 6-12
Printing Indicators 6-14
Resuming Production After Printing has Stopped 6-15
Changing the Printing Material 6-18
Keeping the Printer in Idle Mode 6-24
Shutting Down the Printer 6-25
Material Flush/Fill Wizard 6-28
Maintaining the Printer 6-31
Routine Maintenance Schedule 6-31
Maintenance Counters 6-32
UV Lamp Check 6-34
Cleaning the Print Heads and the Roller 6-34
Cleaning and Replacing the Wiper 6-37
Pattern Test 6-40
Improving Print Quality 6-42
Cleaning and Replacing the Roller Waste Collector 6-43
Aligning the Print Heads 6-47
Optimizing (Calibrating) Print Heads 6-51
Replacing Print Heads 6-60
Testing and Calibrating the UV Lamp 6-71
Calibrating the Load Cells 6-75
Replacing the Odor Filter 6-78
Replacing the UV Lamp 6-79
Replacing the Material Filter 6-84
Replacing the Pump Tubes 6-92
Built-in Tests 6-101
Replacing the Waste Container 6-104
Cleaning the Exterior Panels 6-106
Cleaning the UV Screen 6-106
Backing-Up and Restoring Printer Settings 6-108
ReInitiate Wizard 6-108
Preventive Maintenance Tasks 6-108
DOC-34025 Rev. I vi
To Next Page
Loading...
