Sunfar V560 Series User Manual

6.2.8 V/F PARAMETERS AND OVERLOAD PROTECTION (MOTOR 1) ..................
6.2.9 V/F PARAMETERS AND OVERLOAD PROTECTION (MOTOR 2) ..................
6.2.10 STEADY RUNNING ........................................................................................
6.2.11 VECTOR RUNNING PARAMETERS (MOTOR 1) ...........................................
6.2.12 VECTOR RUNNING PARAMETERS (MOTOR 2) ...........................................
6.2.13 PARAMETER MEASUREMENT AND PRE-EXCITATION ...............................
6.2.14 MULTIFUNCTIONAL INPUT TERMINAL ........................................................
6.2.15 MULTIFUNCTIONAL OUTPUT TERMINAL ....................................................
6.2.16 PULSE INPUT .................................................................................................
6.2.17 PULSE OUT ....................................................................................................
6.2.18 ANALOG INPUT ..............................................................................................
6.2.19 ANALOG INPUT CURVE CORRECTION .......................................................
6.2.20 ANALOG OUTPUT ..........................................................................................
6.2.21 ANALOG INPUT POWER FAILURE DETECTION ..........................................
6.2.22 VIRTUAL ANALOG INPUT ..............................................................................
6.2.23 HOPPING FREQUENCY ................................................................................
6.2.24 BUILT-IN AUXILIARY TIMER ..........................................................................
6.2.25 BUILT-IN AUXILIARY COUNTER ....................................................................
6.2.26 AUXILIARY FUNCTIONS ................................................................................
6.2.27 MOTOR TEMPERATURE DETECTION .........................................................
6.2.28 MULTI-STAGE FREQUENCY SETTING .........................................................
6.2.29 SIMPLE PROGRAMMABLE MULTI-STAGE OPERATION .............................
6.2.30 SWING FREQUENCY OPERATION ...............................................................
6.2.31 PROCESS PID (4MS CONTROL CYCLE) ......................................................
6.2.32 PROCESS PID MULTI-STAGE SETTING .......................................................
6.2.33 PROCESS PID SLEEP FUNCTION ................................................................
6.2.34 REVOLUTION SETTING AND FEEDBACK ....................................................
6.2.35 REVOLUTION CLOSED-LOOP PARAMETER ...............................................
6.2.36 PROTECTION PARAMETER ..........................................................................
6.2.37 TORQUE CONTROL ......................................................................................
6.2.38 COMPENSATION PID (RUNNING CYCLE: 1MS) ..........................................
6.2.39 COMPENSATION PID CONTROLLER PARAMETER SELECTION ...............
6.2.40 MODBUS FIELDBUS (STANDARD EXPANSION CARD CONFIGURATION) .
6.2.41 MAPPING ACCESS PARAMETER ..................................................................
6.2.42 COMMUNICATION LINKAGE SYNCHRONOUS CONTROL ..........................
6.2.43 EXPANSION MULTIFUNCTIONAL INPUT TERMINAL ....................................
51
51
52
53
53
54
54
55
56
57
57
57
58
59
60
60
61
63
64
65
65
66
67
68
70
71
71
72
73
74
75
77
78
79
79
80

Sunfar V560 Series Specifications

General

Brand	Sunfar
Model	V560 Series
Category	Inverter
Language	English