Sunfar V560 Series User Manual

6.2.44 EXPANSION MULTIFUNCTIONAL OUTPUT TERMINAL ................................
6.2.45 SERVOCONTROL AND SCALE POSITIONING ..............................................
6.2.46 VIRTUAL INPUT AND OUTPUT ......................................................................
6.2.47 PROTECTION FUNCTION CONFIGURATION PARAMETER ........................
6.2.48 CORRECTION PARAMETER ..........................................................................
6.2.49 SPECIAL FUNCTIONAL PARAMETERS .........................................................
6.2.50 OTHER CONFIGURATION PARAMETERS ....................................................
6.2.51 HISTORICAL FAULT RECORDING .................................................................
6.2.52 OPERATION STATUS AT THE LAST FAULT ...................................................
6.2.53 BASIC STATUS PARAMETER .........................................................................
6.2.54 AUXILIARY STATUS PARAMETER .................................................................
6.2.55 MODBUS FIELDBUS STATUS PARAMETER (Standard Expansion Card) .....
6.2.56 TERMINAL STATUS AND VARIABLE ..............................................................
6.2.57 COUNTER TIMER VALUE ...............................................................................
6.2.58 SPINDLE CONTROL AND SCALE POSITIONING STATUS PARAMETER ....
6.2.59 EQUIPMENT INFORMATION ..........................................................................
7. DESCRIPTION OF SPECIFIC FUNCTIONS .......................................................................
7.1 SYSTEM MANAGEMENT (GROUP F0.0) .......................................................................
7.2 RUNNING COMMAND SELECTION (GROUP F0.1) .......................................................
7.3 FREQUENCY SETUP (GROUP F0.2) ...........................................................................
7.4 CONTROL COMMAND SOURCE (GROUP F0.3) .........................................................
7.5 START AND STOP (GROUP F0.4) ................................................................................
7.6 ACCEL AND DECEL CHARACTERISTICS (GROUP F1.0) ...........................................
7.7 CARRIER FREQUENCY (GROUP F1.1) .......................................................................
7.8 V/F PARAMETERS AND OVERLOAD PROTECTION (MOTOR 1) (GROUP F1.2) ......
7.9 V/F PARAMETERS AND OVERLOAD PROTECTION (MOTOR 2) (GROUP F1.3) ......
7.10 STEADY RUNNING (GROUP F1.4) .............................................................................
7.11 VECTOR RUNNING PARAMETERS (MOTOR 1) (GROUP F2.0) ...............................
7.12 PARAMETER MEASUREMENT AND PRE-EXCITATION (GROUP F2.2) ...................
7.13 MULTIFUNCTIONAL INPUT TERMINAL (GROUP F3.0) .............................................
7.14 MULTIFUNCTIONAL OUTPUT TERMINAL (GROUP F3.1) .........................................
7.15 PULSE INPUT (GROUP F3.2) ....................................................................................
7.16 PULSE OUTPUT (GROUP F3.3) ................................................................................
7.17 ANALOG INPUT (GROUP F4.0) .................................................................................
7.18 ANALOG INPUT CURVE CORRECTION (GROUP F4.1) ...........................................
7.19 ANALOG OUTPUT (GROUP F4.2) .............................................................................
81
81
83
85
86
86
87
88
88
89
91
91
92
92
93
93
98
98
106
112
116
117
124
126
127
129
129
133
134
135
143
146
147
148
149
149

Sunfar V560 Series Specifications

General

Brand	Sunfar
Model	V560 Series
Category	Inverter
Language	English