Svantek SVAN 958A - Page 143

143
SVAN 958A User Manual
14
LoggerTriggerPre
number of the records taken into account before the fulfilment
of the triggering condition (1  20)
15
LoggerTriggerPost
number of the records taken into account after the fulfilment
of the triggering condition (1  200)
16
LeqInt
detector's type in the LEQ function: 0 - LINEAR, 1 - EXPONENTIAL
17
Reserved
reserved
18
RefLev_a
reference level for acceleration given in µms
-2
(1  100)
19
RefLev_v
reference level for velocity given in nms
-1
(1  100)
20
RefLev_d
reference level for displacement given in pm (1  100)
21
NofChannels
number of channels (4)
22
NofProfiles
number of profiles (12)
23
NotSpect
number of spectrum (4)
24
LowesTerFreq
the lowest possible 1/3 octave frequency (*100Hz)
25
CalibrType
calibration type:
0 - calibration not performed
1 - calibration by measurement
2 - calibration by sensitivity
26
CalibrDate
date of the last calibration
27
CalibrTime
time of the last calibration
28
MeasureTriggerGrad
the gradient level for gradient trigger mode
29
DoseExposureTime
exposure time for dosimeter function (min.)
30
DoseCriterionLev
criterion level (*100dB)
31
DoseTresholdLev
threshold level (*100dB)
32
DoseExchangeRate
exchange rate (dB)
33
RPM_On
RPM measurement: 0 - switched off; 1 - switched on
34
RPM_Pulse
pulses per rotation (1  360)
35
RPM_Buffer
RPM results logging: 0 - switched off; 1 - switched on
36
CycleMeasurementSta
rtDate
measure start date
37..38
CycleMeasurementSta
rtTime
measure start time
39..40
reserved
41..42
startSync
measurement start synchronization point in seconds
43
reserved
…
…
…
Table B.1.4. Hardware settings for channels
Word
number
Name / Value
Comment
0
0xnn05
[05, nn=block_length]
1
0x0806
[06, 08=sub-block_length]