Table B.1.38. Minimum results of 1/1 OCTAVE analysis in one channel
the lowest 1/1 OCTAVE frequency (*100 Hz)
number of 1/1 OCTAVE values
number of TOTAL values = 3
minimum result of the 1/1 octave analysis (*100 dB);
i = 1…NOct + NOctTot
Table B.1.39. Maximum results of 1/3 OCTAVE analysis in one channel
the lowest 1/3 OCTAVE frequency (*100 Hz)
number of 1/3 OCTAVE values
number of TOTAL values = 3
maximum result of the 1/3 octave analysis (*100 dB);
i = 1…NTer + NterTot
Table B.1.40. Minimum results of 1/3 OCTAVE analysis in one channel
the lowest 1/3 OCTAVE frequency (*100 Hz)
number of 1/3 OCTAVE values
number of TOTAL values = 3
minimum result of the 1/3 octave analysis (*100 dB);
i = 1…NTer + NterTot
Note: The TOTAL values, calculated in the case of sound measurements, correspond
to the A, C and LIN filters – respectively. The TOTAL values, calculated in the case of vibration
measurements, correspond to the HP, CH and CH filters – respectively, where CH denotes the filter used in
the channel for Level Meter measurement.
To Next Page
Loading...
