Svantek SVAN 958A - Page 49

49
SVAN 958A User Manual
Changing the field content
When Profile or Function position is chosen,
then the profile number or function name is
changed by means of the ◄ and ► keys.
►
Changing the presentation mode
The presentation mode is changed after pressing the ▲ or ▼ key pressed together with <Alt>.
When Auto Save function is active the auto file name is indicated in the upper
screen field.
Presentation mode for all channels
1. Channel 1 abbreviation.
2. Result for Channel 1 and measurement
units.
3. Channel 2 field.
4. Function name: RMS, VDV, CRF, OVL,
PEAK, P–P, MTVV for vibration input; SPL,
LEQ, SEL, Ln, Ltm3, Ltm5, L01, OVL,
PEAK, MAX, MIN for sound input.
5. Profile 1 abbreviation.
6. Elapsed time shows the current second of
the measurement in the range [1, Meas.
Period].
Changing the active fields
Jumping between positions is made by
means of the ▲, ▼ or ◄ / ► key.
►
Changing the field content
When “Result” position is chosen, then the
result name is changed by means of the ◄
or ► key pressed together with <Alt>.
<Alt/>
6
4
1
2
3
5