Terex Fuchs MHL380 D User Manual

5 WORK OPERATION
5.20 MHL380 D
General notes
 Released while the uppercarriage is slewing,
the left-hand four-way control lever (142/12)
automatically goes to neutral position, and
the uppercarriage is "smoothly" braked. The
uppercarriage may also be braked by coun-
tering, i.e. steering in the opposite direction
of slewing.
 The uppercarriage can be kept in a certain
position by pressing the pushbutton
(142/66), for example for transport on a flat
bed trailer or when driving. The swing
brake (142/66) must not be used to brake
the uppercarriage.
 Do not level the ground in front of the load-
ing machine with the loading equipment by
slewing the uppercarriage to and fro.
 Do not push, knock or beat with the grab.
 Consider the hoses when lowering the grab
into a shaft.
 Do not pull loads with the swing assembly.
 Do not swing the uppercarriage so fast that
the load is pulled strongly outwards due to
centrifugal force and swings during braking.
 Do not brake the slewing motion of the ma-
chine by dropping the loading equipment.
 When slewing, ensure that there is sufficient
all-round carrying capacity.
 No one except the operator may remain
on the machine or in the danger zone
during operation.
 Never force the operating levers.

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English