180
8. SETTING
- List of tests
Displays the list of tests.
Specify the test to be executed when clicking the test chart icon as changing the
tab.
- Setting the test information
Displays the parameters of the test to be executed when clicking the test chart
icon.
Select parameters to be set.
- Setting the mouse navigation
Displays the mouse navigation to be used in the test to be executed when clicking
the test chart icon.
To change the mouse navigation, click the [Mouse Navigation] button. Then, the
list of the mouse navigation is displayed. Select the proper navigation.
- Setting the auxiliary lens
Displays the auxiliary lens to be used in the test to be executed when clicking the
test chart icon.
Click the [Aux. lens] button, and the list of auxiliary lenses is displayed.
When you want to select an auxiliary lens prior to the start of the test, select it.
- Test icon check display and setting the mask
Displays the test chart selected on the [Chart page registration] screen.
When you want to apply a mask and then execute the test by clicking the test
chart icon, set the mask here.
• Unregistered
You can see the unregistered charts in the list of charts. The registered chart is dis-
played in the greyed out status.
• Initial Chart
Specify [Initial Chart]. So you can specify the chart and test to be started when the
instrument starts or is reset.
• Change Name
You can edit the chart page name by using the alphabet letters, numerals and sym-
bols through the keyboard of personal computer.
• OK
Store the changed data and finish the procedure.
• Cancel
Cancel the changed data and finish the procedure.
To Next Page
Loading...
Need help?
General
