Topcon Compu-Vision CV-5000 User Manual

25
1. BEFORE USE
(3) Examination
• Examination list
The list of tests is displayed.
This function is the same as the [ ] button ([Examination list] button) on the toolbar.
• Cross cylinder (axis)
The cylinder axis measurement mode of cross cylinder test (Jackson cross) is accessed.
This function is the same as the [ ] button ([Cross cylinder (axis)] button) on the
toolbar.
• Cross cylinder (power)
The cylinder power measurement mode of cross cylinder test (Jackson cross) is
accessed.
This function is the same as the [ ] button ([Cross cylinder (power)] button) on the
toolbar.
• TOPCON Cross (axis)
The cylinder axis measurement mode of cross cylinder test (TOPCON cross) is accessed.
This function is the same as the [ ] button ([TOPCON cross (axis)] button) on the
toolbar.
• TOPCON Cross (power)
The cylinder power measurement mode of cross cylinder test (TOPCON cross) is
accessed.
This function is the same as the [ ] button ([TOPCON cross (power)] button) on the
toolbar.
• Smart Cross Cylinder
The smart cross test starts.
• Sheard's Criteria
The Sheard's criteria test starts.
You can also start this test with the function button after the phoria test.

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English