Topcon Compu-Vision CV-5000 User Manual

30
1. BEFORE USE
• Control window
Changes "Show/Hide" of the control window.
This function is the same as the [ ] button ([Control window] button) on the toolbar.
Refer to " CONTROL WINDOW" on P.37 for details.
• Toolbar
• Main
Changes "Show/Hide" of the main toolbar.
• Reset
Changes "Show/Hide" of the reset toolbar.
• Customize Toolbar
Refer to " CUSTOMIZE TOOLBAR" on P.194 for details.
• Status Bar
Changes "Show/Hide" of the status bar.
(8) Step
• SPH
Sets the spherical power changing step by operating the mouse. You can select the step
from the following items.
0.25D and 3.00D
• CYL
Sets the cylinder power changing step by operating the mouse. You can select the step
from the following items.
0.25D and 1.00D
• AXS
Sets the cylinder axis changing step by operating the mouse. You can select the step
from the following items.
1 and 5
In addition, you can set the cylinder axis to one of the following values.
0, 45, 90 and 135

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English