34
1. BEFORE USE
(2)-1 Right eye data
Displays the lens data, which are set for the right eye of the measuring head.
Fit the mouse cursor to each area, and the value is highlighted. The value can
be changed by operating the mouse.
When the value is highlighted, you can enter a value directly through the key-
board.
The colors for the values of the spherical, cylinder and addition refractive pow-
ers are changed according to the value or occluding status.
(2)-2 Left eye data
Displays the data in the same way as the right eye.
(2)-3 Data item
The data items are displayed between the right and left eye data.
The changing step quantity of the mouse operation is displayed on [Function
button].
The step quantity of axis is displayed here in ( ).
In the far-point test, the addition refractive power item is shadowed, and in the
near point test, the spherical power item is shadowed.
The shadowed item cannot be selected.
Fit the mouse cursor to each item, and the both eyes values are highlighted.
The data of both eyes can be changed at the same time by operating the
mouse.
(2)-4 Visual acuity/prism
Displays the set visual acuity result or prism data.
If prism is shown by the base direction notation (XY), the refractive power of hor-
izontal/vertical prism is displayed.
If prism is shown by the polar coordinate notation (r/), the refractive power and
angle of prism are displayed.
Refer to "8.2.7 Screen settings" on P.192 for changing the prism refrac-
tive power notation.
To Next Page
Loading...
Need help?
General
