46
2. INSTALLATION
10 Place a check mark for the language to be added. Then, click the [Start Setup] button.
The installation of the CV-5000 language module is executed.
When it is not necessary to add a language, click the [Cancel] button and proceed to the
next step.
After the installation is completed, the setup screen for updating the measuring head
firmware appears.
11 Select the serial communication port to which the CV power supply unit is connected
and click the [Connect] button.
Check the version and then click the [Start Setup] button.
The firmware of the measuring head is updated.
After the installation is completed, the setup screen for updating the CV power supply
unit firmware appears.