Troubleshooting
Topcon HiPer+ Operator’s Manual
5-10
The settings for Port B
may have been
changed.
• The settings for Port B are: 115200
baud rate, 8 data bits, 1 stop bit, no
parity, and no handshaking.
• Try enabling RTS/CTS handshaking
for Port B. Do not change other
settings.
The corresponding
receiver options may
be disabled or expired.
• See “Checking an OAF” on
page 4-14 for details on how to
check current options.
• Enable the corresponding receiver
options.
• Contact your dealer to purchase
current receiver options.
Error Message
Can’t find Bluetooth.
Causes Solution
The receiver’s Slot 3 is
turned off.
1. Connect your receiver and a
computer using an RS232 cable
(see “Establishing an RS232 Cable
Connection” on page 2-7).
2. Click Configuration->Receiver
->General.
3. In the Turn on/off Slots area,
enable the Slot 3 (B) check box.
The Bluetooth module
is linked with another
device.
Close the connection with the device,
then connect to your receiver.
To Next Page
Loading...
