Toshiba B-EP4DL-GH32-QM-R - Data Transmission Methods; IrDA Communication; USB Communication

iv
Page
5.5 COMMANDS RELATED TO CLEAR ..................................................................................................... 5-22
5.5.1 IMAGE BUFFER CLEAR COMMAND [ESC] C ........................ 5-22
5.5.2 CLEAR AREA COMMAND [ESC] XR ...................... 5-23
5.6 COMMANDS RELATED TO DRAWING FORMAT ............................................................................... 5-25
5.6.1 LINE FORMAT COMMAND [ESC] LC ...................... 5-25
5.6.2 BIT MAP FONT FORMAT COMMAND [ESC] PC ...................... 5-33
5.6.3 OUTLINE FONT FORMAT COMMAND [ESC] PV ...................... 5-50
5.6.4 BARCODE FORMAT COMMAND [ESC] XB ...................... 5-68
(WPC, CODE93, CODE128, UCC/EAN128, EAN128, Customer Barcode, POSTNET, RM4SCC, KIX CODE)
5.6.5 BARCODE FORMAT COMMAND [ESC] XB ...................... 5-83
(MSI, Interleaved 2 of 5, CODE39, NW7, Industrial 2 of 5, MATRIX 2 of 5 for NEC)
5.6.6 BARCODE FORMAT COMMAND (GS1 Databar) [ESC] XB ...................... 5-93
5.6.7 TWO-DIMENSIONAL CODE FORMAT COMMAND (Data Matrix) [ESC] XB .................... 5-103
5.6.8 TWO-DIMENSIONAL CODE FORMAT COMMAND (PDF417) [ESC] XB .................... 5-113
5.6.9 TWO-DIMENSIONAL CODE FORMAT COMMAND (MicroPDF417) [ESC] XB .................... 5-120
5.6.10 TWO-DIMENSIONAL CODE FORMAT COMMAND (QR Code) [ESC] XB .................... 5-128
5.6.11 TWO-DIMENSIONAL CODE FORMAT COMMAND (MaxiCode) [ESC] XB .................... 5-136
5.7 COMMANDS RELATED TO PRINT DATA ......................................................................................... 5-142
5.7.1 BIT MAP FONT DATA COMMAND [ESC] RC .................... 5-142
5.7.2 OUTLINE FONT DATA COMMAND [ESC] RV .................... 5-147
5.7.3 BARCODE/TWO-DIMENSIONAL CODE DATA COMMAND [ESC] RB .................... 5-150
(Any codes other than MaxiCode)
5.7.4 TWO-DIMENSIONAL CODE DATA COMMAND
(MaxiCode) [ESC] RB .................... 5-161
5.8 COMMANDS RELATED TO ISSUE AND FEED ................................................................................. 5-163
5.8.1 ISSUE COMMAND [ESC] XS .................... 5-163
5.8.2 FEED COMMAND [ESC] T ....................... 5-167
5.8.3 STORAGE AREA ALLOCATE COMMAND [ESC] XF .................... 5-169
5.9 COMMANDS RELATED TO FORMAT ............................................................................................... 5-171
5.9.1 FLASH MEMORY FORMAT COMMAND [ESC] J1 ..................... 5-171
5.10 COMMANDS RELATED TO WRITABLE CHARACTERS ................................................................... 5-172
5.10.1 2-BYTE WRITABLE CHARACTER CODE RANGE COMMAND [ESC] XE .................... 5-172
5.10.2 BIT MAP WRITABLE CHARACTER COMMAND [ESC] XD .................... 5-174
5.11 COMMANDS RELATED TO GRAPHICS ............................................................................................ 5-182
5.11.1 GRAPHIC COMMAND [ESC] SG .................... 5-182
5.12 COMMANDS RELATED TO PC COMMAND SAVING ....................................................................... 5-189
5.12.1 SAVE START COMMAND [ESC] XO .................... 5-189
5.12.2 SAVE TERMINATE COMMAND [ESC] XP .................... 5-191