CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-24
8.10.12 DOWNLOADED CHARACTER ERASE COMMAND [ESC] ?
Function Erases downloaded characters in a specified code.
Format [ESC] ?n
Term ASCII: ESC ?
Hex: 1Bh 3Fh
[Parameter]
n: Erasing downloaded characters 32 ≤ n ≤ 126 (20h ≤ n ≤ 7Eh)
Default value n: 0
Explanation (1) n refers to a character code in which a defined pattern is erased. After
downloaded characters are erased, the same pattern as the internal characters are
printed.
(2) If a specified character code is undefined, this command will be ignored.
Reference Downloaded Character (Writable Character) Define Command ([ESC] &)
Downloaded Character (Writable Character) Set Command ([ESC] %)
To Next Page
Loading...
Need help?
General