CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-97
8.11.7 DEVICE ADDRESS ACQUIRE COMMAND [ESC] IT
Function Reads the device address of the Bluetooth or MAC address of the wireless LAN.
Format [ESC] IT [LF] [NUL]
Explanation (1) This command reads the device address of the Bluetooth or MAC address of the
wireless LAN. When using the IrDA: TEC Protocol, the following information field
is placed in the information frame and sent in packets.
[Information field to be sent when IrDA: TEC Protocol is used]
STX Bluetooth device address or wireless LAN MAC address CRC CRC
02H 12 bytes xxH xxH
[Information field to be sent when IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C,
Bluetooth, or wireless LAN is used]
STX Bluetooth device address or wireless LAN MAC address
02H 12 bytes
The printer sends the following information:
Bluetooth device address: 0015b5aa0005
Wireless LAN MAC address: 000940387630
Bluetooth device address:
[30H]
[30H][31H] [35H] [62H] [35H] [61H] [61H] [30H] [30H] [30H] [35H]
0 0 1 5 b 5 a a 0 0 0 5
Wireless LAN MAC address:
[30H]
[30H][30H] [39H] [34H] [30H] [33H] [38H] [37H] [36H] [33H] [30H]
0 0 0 9 4 0 3 8 7 6 3 0
To Next Page
Loading...
Need help?
General