CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-19
6.5.2 BIT MAP FONT FIELD COMMAND [ESC] PC
Function Sets the format indicating the position on the label at which the bit map font is to be
printed and how it is to be printed.
Format [ESC] PCaa; bbbb, cccc, d, e, f, gg, h, ii, j, k(, Pl) [LF] [NUL]
Term aa: Character string No.
00 to 99
(The same No. must not be used in one form for the bit map font field, the
outline font field, and the barcode/two-dimensional field.)
bbbb: Print origin of X-coordinate of character string
Fixed at 4 digits (in 0.1 mm units)
cccc: Print origin of Y-coordinate of character string
Fixed at 4 digits (in 0.1 mm units)
d: Character horizontal magnification
1: 0.5 magnification 5: 2.5 magnification
2: 1 magnification 6: 3 magnification
3: 1.5 magnification 7: 3.5 magnification
4: 2 magnification 8: 4 magnification
e: Character vertical magnification
1: 0.5 magnification 5: 2.5 magnification
2: 1 magnification 6: 3 magnification
3: 1.5 magnification 7: 3.5 magnification
4: 2 magnification 8: 4 magnification
f: Type of font
A: Standard (12 × 24 dots)
B: Bold Character (48 × 96 dots)
C: Writable Character (24 × 24 dots)
D: Price Font 1 (16 × 40 dots)
E: Price Font 2 (32 × 48 dots)
203-dpi print head
F: Times Roman (Bold) 21 points
G: Helvetica (Bold) 18 points
H: Letter Gothic (Medium) 14.3 points
I: Courier (Medium) 15 points
J: Presentation (Bold) 27 points
O: GOTHIC725 Black 6 points
P: Kanji/Writable Character (16 × 16 dots)
Q: Chinese/Writable Character (24 × 24 dots)
R: Korean/Writable Character (24 × 24 dots)
S: (Reserved)
T: (Reserved)
U: (Reserved)
To Next Page
Loading...
Need help?
General