CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-46
6.5.11 TWO-DIMENSIONAL CODE FORMAT COMMAND
(DATA MATRIX) [ESC] XB
Function Sets the format to indicate the position on the label, at which the two-dimensional code
is to be printed and how it is to be printed.
Format [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h (, Ciiijjj) (, Jkkllmmmnnn), ooo, p, q [LF] [NUL]
Term aa: Two-dimensional code No.
00 to 99
(The same No. must not be used in one form for the bit map font field, the
outline font field, and the two-dimensional code field.)
bbbb: Print origin of X-coordinate of the two-dimensional code
Fixed at 4 digits (in units of 0.1 mm)
cccc: Print origin of Y-coordinate of the two-dimensional code
Fixed at 4 digits (in units of 0.1 mm)
d: Type of two-dimensional code
Q: Data Matrix
ee: ECC type
00: ECC000
05: ECC050
08: ECC080
10: ECC100
14: ECC140
20: ECC200
ff: 1-cell width
01 to 09 (in units of dots)
gg: Format ID
01: Format ID 1
02: Format ID 2
03: Format ID 3
04: Format ID 4
05: Format ID 5
06: Format ID 6
h: Rotational angle of two-dimensional code
0: 0°
1: 90°
2: 180°
3: 270°
To Next Page
Loading...
Need help?
General