Toshiba B-EP4DL-GH32-QM-R - 8.2.3 PRECAUTIONS; 8.3 FONT SPECIFICATIONS; 8.4 EXTERNAL (CUSTOM) CHARACTERS SPECIFICATIONS; 8.5 INPUT DATA BUFFER

CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-3
8.2.3 PRECAUTIONS
Print density fine adjustment cannot be selected in the ESC/POS mode. The mode must be
switched to the TPCL, LABEL or RECEIPT1 mode once, to select print density fine adjustment.
8.3 FONT SPECIFICATIONS
Font type: Alphanumeric characters: 95
Extended graphics: 128 characters × 4
Chinese characters: JIS 1 level 2
Font structure: ANK Chinese character, Chinese, or Korean
Font A 12×24 24×24
8.4 EXTERNAL (CUSTOM) CHARACTERS SPECIFICATIONS
• ANK
Font A 95 characters (20h to 7Eh)
• Chinese characters
* 7721h to 777Eh for JIS, EC40h to EC9Eh (except for EC7Fh) for shift JIS, and F7A1h to F7Feh for
the EUC code
• Chinese
FF40h to FF7Eh, FF80h to FFFCh
• Korean
FF40h to FF7Eh, FF80h to FFFCh
* The specified writable characters are not backed up. (They apply unitl the printer is turned off.)
8.5 INPUT DATA BUFFER
Input data buffer (receive buffer) size: 512 Kbytes