CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-53
8.10.37 CHINESE CHARACTER MODE CANCEL COMMAND [FS] .
Function Cancels Chinese character mode.
Format [FS] .
Term ASCII: FS.
Hex: 1Ch 2Eh
Explanation (1) If this command is received with shift JIS selected for a Chinese character code
system, the defined parameter setting will be applied when the Chinese character
code system is changed to JIS. There is no impact upon printing.
(2) Chinese character mode is canceled by default.
Reference Chinese Character Mode Set Command ([FS] &)
Chinese Character Code System Set Command ([FS] C)
To Next Page
Loading...
Need help?
General