CHAPTER 10 SYSTEM MODE (INTERFACE COMMANDS)
B-EP Series
10-24
10.10 COMMANDS RELATED TO BLUETOOTH AND WIRELESS LAN
10.10.1 DEVICE ADDRESS ACQUIRE COMMAND [ESC] IT
Function Reads the device address of the Bluetooth or MAC address of the wireless LAN.
Format [ESC] IT [LF] [NUL]
Explanation (1) This command reads the device address of the Bluetooth or MAC address of the
wireless LAN. When using the IrDA, the following information field is placed in the
information frame and sent to the Bluetooth or wireless LAN.
[LABEL, RECEIPT, ESC/POS modes]
[Information field to be sent when IrDA: TEC Protocol is used]
STX Bluetooth device address CRC
02H 12 bytes xxH xxH
[Information field to be sent when IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C,
Bluetooth or wireless LAN is used]
STX Bluetooth device address
02H 12 bytes
[TPCL mode]
[Information field to be sent when IrDA: TEC Protocol is used]
STX Bluetooth device address CRC
02H 12 bytes xxH xxH
[Information field to be sent when IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C,
Bluetooth, or wireless LAN is used]
SOH STX Bluetooth device address ETX EOT CR LF
01H 02H 12 bytes 03H 04H 0DH 0AH
The printer sends the following information:
Bluetooth device address: 0001ccf0042b
Bluetooth device address:
[30H]
[30H] [30H] [31H] [63H] [63H] [66H] [30H] [30H] [34H] [32H] [62H]
0 0 0 1 c c f 0 0 4 2 b
Example [ESC] IT [LF] [NUL]
To Next Page
Loading...
Need help?
General