CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP Series
7-37
7.6.5 PAGE MODE CANCEL COMMAND [CAN]
Function Cancels page mode.
Format [CAN]
Explanation (1) Data received in page mode is cleared.
(2) Values set before the Page Mode Select Command is sent, or set in page mode
are retained.
(3) This command is ignored when it is received while the printer is not in page mode.
(4) To cancel the page mode and return to usual print and line feed operations using
the Print and Line Feed Command ([LF]) for each line, or to disable issue of data
received in page mode, page mode can be canceled by sending the Page Mode
Cancel Command ([CAN]) until the Page Mode Print Command ([FF]) is received.
To Next Page
Loading...
