CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP Series
7-35
7.6.3 PAGE MODE SELECT COMMAND [GS] C
Function Changes to page mode.
Format [GS] C
Explanation (1) When any data remains unprinted before the Page Select command is received,
the data is printed before changing to page mode.
(2) The printer performs a line feed only without printing in page mode even if the Line
Feed command ([LF]) is received.
(3) By sending the Page Mode Print Command ([FF]), print data received in page
mode can be printed collectively.
(4) To cancel the page mode and return to usual print and line feed operations using
the Print and Line Feed Command ([LF]) for each line, or to disable issue of data
received in page mode, page mode can be canceled by sending the Page Mode
Cancel Command ([CAN]) until the Page Mode Print Command is received.
(5) When this command is received in page mode, it is ignored.
(6) Length to be printed collectively is 1000.0 mm. When data length to be printed
exceeds the above value, the subsequent data is discarded and printing is not
performed until the Page Mode Print Command ([FF]) is received.
Printing
Standard mode Page mode
Line feed command
LF
Page mode select
command
GS
C
Page mode print
command ([FF])
Page mode cancel
command ([CAN])
Printing
Clearing
drawing buffer
Line feed command
LF
To Next Page
Loading...
Need help?
General