CHAPTER 12 CHARACTER CODE TABLE
B-EP Series
12-1
12. CHARACTER CODE TABLE
12.1 GENERAL DESCRIPTION
This chapter provides the character code tables.
12.2 CHARACTER CODE
The printable characters are slightly different according to the character type, because the fonts,
which have been installed on the printer, are not described in the table.
12.2.1
UTF-8 CHARACTER CODE
Characters to be printed are shown below when UTF-8 is selected as a character code and its code
is entered.
* In the following code list, the high bytes are plotted along the vertical coordinate while the low
bytes are plotted along the horizontal coordinate.
The number of digits for the horizontal coordinate is fixed to 1 digit. Therefore, when the number
of digits for the vertical coordinate is 1, the character is a 1-byte character (2-digit hexadecimal).
In the same way, when the vertical coordinate is 3 or 5 digits, the character is a 2-byte character
(4-digit hexadecimal) or 3-byte character (6-digit hexadecimal), respectively.
e.g. In the following list, the character for 0xE282A1 represents “A” based on E282A of the vertical
coordinate and 1 of the horizontal coordinate.
0 1 2 3 4 5 6 7 8 9 A B C D E F
E2809
! “ # $ % & ‘ ( ) * + , - . /
E281B 0 1 2 3456789 : ;<=> ?
E282A @ A B C D E F G H I J K L M N O
E2889 P Q R STUVWXYZ [
\
]^ _
To Next Page
Loading...
Need help?
General