CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP Series
7-30
7.5.14 CHARACTER ROTATE COMMAND [ESC] R
Function Specifies the rotational angle of characters.
Format [ESC] Rn
Initial value n: 0
Term n: Rotational angle of characters
0: 0°
1: 90°
2: 180°
3: 270°
Explanation (1) When “n” is set to any value other than the above, a command error occurs.
(2) The characters are rotated as shown below:
* When characters are rotated, they are not aligned to the reference line, because
each font has a different parameter for the print position. If the character
magnification is changed, they are not aligned to the reference line either.
270° 180° 90° 0°
Origin
To Next Page
Loading...
Need help?
General