CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-10
8.10.3 PAGE MODE PRINT COMMAND [FF]
Function Prints the data expanded in the print area in page mode, and returns the printer to
standard mode.
Format ASCII: FF
Hex: 0Ch
Explanation (1) This command is ignored except when page mode is selected.
(2) The data that has been drawn is all erased after printing is completed.
(3) The print area specified by the Page Mode Print Area Set Command ([ESC] W) is
initialized.
(4) After this command is executed, the next print starting position is the beginning of a
line.
Reference Page Mode Collective Print Command ([ESC] [FF])
Switching to Page Mode Command ([ESC] L)
Switching to Standard Mode Command ([ESC] S)
To Next Page
Loading...
Need help?
General