CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-9
8.10.2 LINE FEED COMMAND [LF]
Function Prints data and inserts a line feed.
Format ASCII: LF
Hex: 0Ah
Explanation (1) If print data is received with the specified number of digits per line exceeded and no
line feed ([LF]), it will be printed with a line feed inserted automatically.
(2) If this command is received without print data, a line feed of a specified length will
be just inserted.
(3) Data that contains 4,096 bytes in a single line (up to [LF]) must not be transmitted.
If the number of bytes exceeds 4,096, the correct functioning of the printer will not
be guaranteed.
[Program example]
fprintf( stdprn, "0123456789\n");
fputc( '\n', stdprn ); /* Line feed */
fprintf( stdprn, "ABCDEFGH\n");
[Print example]
0123156789
ABCDEFGH
Reference 30-dot Line Feed Length Set Command ([ESC] 2)
Minimum Dots for Line Feed Length Set Command ([ESC] 3)
Blank line
To Next Page
Loading...
Need help?
General