CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP Series
7-15
7.5.3 OUTLINE FONT FORMAT COMMAND [ESC] KV
Function Sets the outline font.
Format [ESC] KVabbbccc
Initial value None
Term a: Font type
A: TEC Font 1 (Helvetica [Bold])
B: TEC Font 1 (Helvetica [Bold], Proportional)
K: Reserved
bbb: Character width
016 to 240 (in units of dots)
ccc: Character height
016 to 240 (in units of dots)
Explanation (1) When “a,” “bbb,” and “ccc” are set to any value other than the above, a command
error occurs.
To Next Page
Loading...
Need help?
General