CHAPTER 1 SCOPE/GENERAL DESCRIPTION
B-EP Series
1-1
1. SCOPE/GENERAL DESCRIPTION
1.1 SCOPE
This specification applies to the software that is used with the “B-EP series” portable printer.
1.2 GENERAL DESCRIPTION
The external equipment interface connects a printer to the host computer through the IrDA, RS-232C,
Bluetooth
○R
, wireless LAN or USB interface for storing forms, or issuing labels or receipts. This
specification describes how to use the external equipment interface.
The specification is organized as below. Refer to each chapter according to your needs.
1.2.1 SPECIFICATION ORGANIZATION
Chapter 1: SCOPE/GENERAL DESCRIPTION
Chapter 2: OUTLINE OF SPECIFICATIONS
Chapter 3: INTERFACE
Chapter 4: TRANSMISSION SEQUENCE
Chapter 5: TPCL MODE (INTERFACE COMMANDS)
Chapter 6: LABEL MODE (INTERFACE COMMANDS)
Chapter 7: RECEIPT MODE (INTERFACE COMMANDS)
Chapter 8: ESC/POS MODE (INTERFACE COMMANDS)
Chapter 9: ERROR PROCESSING
Chapter 10: SYSTEM MODE
Chapter 11: OTHER FUNCTIONS
Chapter 12: CHARACTER CODE TABLE
Chapter 13: KANJI CODE TABLE
Chapter 14: CHINESE CODE TABLE
Chapter 15: KOREAN CODE TABLE
Chapter 16: BARCODE/TWO-DIMENSIONAL CODE TABLE
Bluetooth is a registered trademark owned by Bluetooth SIG. Inc. and used by TOSHIBA TEC
CORPORATION under license.
Company names and products in this document are the trademarks or registered trademarks of each
company.
To Next Page
Loading...
Need help?
General